12" x 36" Standard Finish
Part # 15021-101
This Super Strong design is for sport fishing, large cruising and commercial vessels. This series has a completely flat blade design which reduces More...
WHERE TO BUYOut of Package Width (in) | 36 |
Out of Package Length/Depth (in) | 12 |
This Super Strong design is for sport fishing, large cruising and commercial vessels. This series has a completely flat blade design which reduces spray giving you a clean, dry ride. Boat lengths 24’ (7.3 m) to 52’ (15.8 m). Blades are constructed of 7 gauge (4.6 mm) laser cut 304 stainless steel with 3/8 (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16” (.8 cm) upper and 3/8” (9.5 mm) lower stainless steel mounting bolts. 3.75” (9.5 cm) sacrificial anodes installed.
- L" X W": 12" x 36"
- Boat Length: 33' - 52'
- (2) 7-gauge stainless steel standard finish blades
- (2) 15056-002 12-Volt (15063-002 for 24-Volt) XD Extreme Duty actuators with 6’ (1.8 m) & Deutsch connectors
- (2) 15140-001 120 Lower Mounting Brackets
- Lenco owner's/installation manual
- Stainless steel mounting hardware
- Note: Actuator extension harnesses not in kits, must be purchased separately (2 required)