16" x 42" Standard Finish
Part # 15025-101
Offering the same features as our single system, this series gives you a longer blade design with dual actuator support for those large More...
WHERE TO BUYOut of Package Width (in) | 42 |
Out of Package Length/Depth (in) | 16 |
Offering the same features as our single system, this series gives you a longer blade design with dual actuator support for those large vessels needing that extra lift. Boat lengths 35’ (10.6 m) to 80’ (24.4 m). Blades are constructed of 7 gauge (4.6 mm) laser cut 304 stainless steel with 3/8 (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16” (.8 cm) upper and 3/8” (9.5 mm) lower stainless steel mounting bolts. 3.75” (9.5 cm) sacrificial anodes installed.
- L" X W": 16" x 42"
- Boat Length: 50' - 80'
- (2) 7-gauge stainless steel standard finish blades
- (4) 15056-002 12-Volt (15063-002 for 24-Volt) XD Extreme Duty actuators with 6’ (1.8 m) & Deutsch connectors
- (4) 15140-001 120 Lower Mounting Brackets
- Lenco owner's/installation manual
- Stainless steel mounting hardware
- Note: Actuator extension harnesses not in kits, must be purchased separately (4 required)