All the robust features of our single actuator XD series with twice the actuator power for larger, faster boats that dont back away from rough conditions. Boat lengths 23’ (7 m) to 50’ (15.2 m). Blades are constructed of Electro-Polished 10 gauge (3.4 mm) laser cut 304 stainless steel with 1” (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8” (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets,3/8” (9.5 mm) stainless steel mounting bolts. 3.75” (9.5 cm) sacrificial anodes installed.

• L" X W": 19" x 14"
• Boat Length: 23' - 45'
• Min. Transom Height: 10.5" (26.7 cm)
• (2) 10-gauge stainless steel Electro-Polished blades
• (4) 15056-001 XD Extreme Duty actuators with 6’ (1.8 m) leads & Deutsch connectors
• Lenco owner's/installation manual
• Note: Boat-mounting hardware to be supplied by the customer
• Note: Actuator extension harnesses not in kits, must be purchased separately (4 required)